Avrora parts
  1. Home
  2. Catalog
  3. Komatsu catalog

D155A-2 S/N 50001-UP (S6D155-4 Eng. Installed) WORK EQUIPMENT parts Komatsu


OK request send
BULLDOZERS
D155A-2 S/N 50001-UP (S6D155-4 Eng. Installed)
WORK EQUIPMENT

Section WORK EQUIPMENT D155A-2 S/N 50001-UP (S6D155-4 Eng. Installed) Komatsu:

STRAIGHT TILT BLADE
STRAIGHT TILT BLADE
210010
STRAIGHT TILT U-BLADE
STRAIGHT TILT U-BLADE
210020
STRAIGHT TILT SEMI U-BLADE
STRAIGHT TILT SEMI U-BLADE
210030
STRAIGHT TILT SEMI U-BLADE (FOR DUST DISPOSAL SPEC.)
STRAIGHT TILT SEMI U-BLADE (FOR DUST DISPOSAL SPEC.)
210040
STRAIGHT TILT BLADE (WITH PUSHER PLATE)
STRAIGHT TILT BLADE (WITH PUSHER PLATE)
210050
STRAIGHT TILT SEMI U-BLADE (WITH PUSHER PLATE)
STRAIGHT TILT SEMI U-BLADE (WITH PUSHER PLATE)
210060
STRAIGHT TILT FRAME
STRAIGHT TILT FRAME
210070
STRAIGHT TILT BLADE (REINFORCED TYPE)
STRAIGHT TILT BLADE (REINFORCED TYPE)
210080
STRAIGHT TILT U-BLADE (REINFORCED TYPE)
STRAIGHT TILT U-BLADE (REINFORCED TYPE)
210090
STRAIGHT TILT SEMI U-BLADE (REINFORCED TYPE)
STRAIGHT TILT SEMI U-BLADE (REINFORCED TYPE)
210100
STRAIGHT TILT FRAME (REINFORCED TYPE)
STRAIGHT TILT FRAME (REINFORCED TYPE)
210110
BLADE TILT CYLINDER
BLADE TILT CYLINDER
210120
BLADE TILT CYLINDER PIPING
BLADE TILT CYLINDER PIPING
210130
ANGLE BLADE
ANGLE BLADE
210140
C-FRAME
C-FRAME
210150
COAL BLADE (HYDRAULIC TYPE) 17M3
COAL BLADE (HYDRAULIC TYPE) 17M3
210160
COAL BLADE (HYDRAULIC TILT TYPE) 17M3
COAL BLADE (HYDRAULIC TILT TYPE) 17M3
210170
RIPPER SHANK¤ BEAM AND LINK (MULTI SHANK RIPPER)
RIPPER SHANK¤ BEAM AND LINK (MULTI SHANK RIPPER)
210180
RIPPER SHANK¤ BEAM AND LINK (MULTI SHANK RIPPER) (FOR HARD LOCK) (FOR SAUDI ARABIA)
RIPPER SHANK¤ BEAM AND LINK (MULTI SHANK RIPPER) (FOR HARD LOCK) (FOR SAUDI ARABIA)
210190
RIPPER SHANK¤ BEEM AND LINK (GIANT RIPPER)
RIPPER SHANK¤ BEEM AND LINK (GIANT RIPPER)
210200
RIPPER SHANK¤ BEEM AND LINK (GIANT RIPPER) (FOR HARD LOCK) (FOR SAUDI ARABIA)
RIPPER SHANK¤ BEEM AND LINK (GIANT RIPPER) (FOR HARD LOCK) (FOR SAUDI ARABIA)
210210
RIPPER LIFT CYLINDER
RIPPER LIFT CYLINDER
210220
RIPPER TILT CYLINDER (FOR VARIABLE TYPE RIPPER)
RIPPER TILT CYLINDER (FOR VARIABLE TYPE RIPPER)
210230
PIN PULLER CYLINDER (FOR GIANT RIPPER)(#50001-52739)
PIN PULLER CYLINDER (FOR GIANT RIPPER)(#50001-52739)
210240
PIN PULLER CYLINDER (FOR GIANT RIPPER)(#52740-)
PIN PULLER CYLINDER (FOR GIANT RIPPER)(#52740-)
210250
RIPPER SELECTOR VALVE
RIPPER SELECTOR VALVE
210260
RIPPER MAIN PIPING (FOR VARIABLE TYPE RIPPER)
RIPPER MAIN PIPING (FOR VARIABLE TYPE RIPPER)
210270
RIPPER CYLINDER PIPING (FOR VARIABLE TYPE RIPPER)
RIPPER CYLINDER PIPING (FOR VARIABLE TYPE RIPPER)
210280
RIPPER MAIN PIPING AND CYLINDER PIPING (FOR RIGID TYPE RIPPER)
RIPPER MAIN PIPING AND CYLINDER PIPING (FOR RIGID TYPE RIPPER)
210290
PIN PULLER PIPING (FOR GIANT RIPPER)
PIN PULLER PIPING (FOR GIANT RIPPER)
210300
RIPPER ELECTRICAL SYSTEM
RIPPER ELECTRICAL SYSTEM
210310
TOWING WINCH CASE (1/2)
TOWING WINCH CASE (1/2)
210320
TOWING WINCH CASE (2/2)
TOWING WINCH CASE (2/2)
210330
INPUT SHAFT AND BEVEL GEAR (FOR TOWING WINCH)
INPUT SHAFT AND BEVEL GEAR (FOR TOWING WINCH)
210340
BRAKE DRUM (FOR TOWING WINCH)
BRAKE DRUM (FOR TOWING WINCH)
210350
CABLE DRUM (FOR TOWING WINCH)
CABLE DRUM (FOR TOWING WINCH)
210360
CLUTCH DRUM (FOR TOWING WINCH)
CLUTCH DRUM (FOR TOWING WINCH)
210370
BRAKE DRUM (FOR TOWING WINCH)
BRAKE DRUM (FOR TOWING WINCH)
210380
CABLE (FOR TOWING WINCH)
CABLE (FOR TOWING WINCH)
210390
DRAWBAR (FOR TOWING WINCH)
DRAWBAR (FOR TOWING WINCH)
210400
BRAKE CYLINDER (FOR TOWING WINCH)
BRAKE CYLINDER (FOR TOWING WINCH)
210410
HYDRAULIC PUMP MOUNT (FOR TOWING WINCH)
HYDRAULIC PUMP MOUNT (FOR TOWING WINCH)
210420
HYDRAULIC PIPING (FOR TOWING WINCH)
HYDRAULIC PIPING (FOR TOWING WINCH)
210430
WINCH PIPING (FOR TOWING WINCH)
WINCH PIPING (FOR TOWING WINCH)
210440
CONTROL VALVE (FOR TOWING WINCH)
CONTROL VALVE (FOR TOWING WINCH)
210450
HYDRAULIC PUMP (FOR TOWING WINCH)
HYDRAULIC PUMP (FOR TOWING WINCH)
210460
POWER TAKE OFF SHAFT (FOR REAR P.C.U.)
POWER TAKE OFF SHAFT (FOR REAR P.C.U.)
210470
INPUT SHAFT AND HYDRAULIC PUMP (FOR REAR P.C.U.)
INPUT SHAFT AND HYDRAULIC PUMP (FOR REAR P.C.U.)
210480
MAIN SHAFT (FOR REAR P.C.U.)
MAIN SHAFT (FOR REAR P.C.U.)
210490
CLUTCH AND DRUM (FOR REAR P.C.U.)
CLUTCH AND DRUM (FOR REAR P.C.U.)
210500
BRAKE BAND (FOR REAR P.C.U.)
BRAKE BAND (FOR REAR P.C.U.)
210510
CASE AND CVER (FOR REAR P.C.U.)
CASE AND CVER (FOR REAR P.C.U.)
210520
SHEAVE (FOR REAR P.C.U.)
SHEAVE (FOR REAR P.C.U.)
210530
CONTROL VALVE (FOR REAR P.C.U.)
CONTROL VALVE (FOR REAR P.C.U.)
210540
HYDRAULIC PIPING (FOR REAR P.C.U.)
HYDRAULIC PIPING (FOR REAR P.C.U.)
210550
HYDRAULIC PUMP (FOR REAR P.C.U.)
HYDRAULIC PUMP (FOR REAR P.C.U.)
210560
MODIFIED CHASSIS PARTS (FOR REAR P.C.U.) (1/2)(#50001-50064)
MODIFIED CHASSIS PARTS (FOR REAR P.C.U.) (1/2)(#50001-50064)
210570
MODIFIED CHASSIS PARTS (FOR REAR P.C.U.) (1/2)(#50065-)
MODIFIED CHASSIS PARTS (FOR REAR P.C.U.) (1/2)(#50065-)
210580
MODIFIED CHASSIS PARTS (FOR REAR P.C.U.) (2/2)
MODIFIED CHASSIS PARTS (FOR REAR P.C.U.) (2/2)
210590
DRAWBAR
DRAWBAR
210600
COUNTER WEIGHT
COUNTER WEIGHT
210610

Truck sale:

KOMATSU D155A-2
Call 
KOMATSU D155A-2 Alamro
2011 KOMATSU D155A-2
USD $65,000 
2011 KOMATSU D155A-2 impact automachinery services
Athlone, ROSCOMMON, Ireland
1990 KOMATSU D155A-2
USD $68,500 
1990 KOMATSU D155A-2 Compass Equipment
Atlanta, Georgia
1991 KOMATSU D155A-2
USD $69,000 
1991 KOMATSU D155A-2 Compass Equipment
Atlanta, Georgia
1995 KOMATSU D155A-2
USD $30,000 
1995 KOMATSU D155A-2 SCHUTT SURPLUS EIRL
LIMA, LIMA, Peru



Back to top