LINK¤ L=88.6 453-217 - KOMATSU

JUNHOM Brake Caliper Compression Tool Car Ratcheting Brake Press Tool, 4 in 1 Disc Brake Car Wheel Piston Spreader with 2Pcs Large Plates
JUNHOM The brake caliper press tool has 2 sets of push boards (7.01*2.36 inches and 4.53*2.17 inches), which are suitable for most single and twin pistons floating calipers, twin and quad pistons fixed calipers or some sextuplet pistons fixed calipers (Just make sure the piston calipers space can accommodate the spreader). Adopt the magnet adsorption design, not easy to fall off. || 360° Ratchet Design: Adopt 360 degree ratchet design, easy to get into place and use from any direction. The ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components. || Reversing Switch: There is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates. || Working Principle: The brake caliper press tool can spread to push these boards or retract when finished it. (Adjust by the switch). In expanded mode, the centrally located ratchet screw creates uniform thrust to the push boards that can quickly push several pistons in the caliper at the same time. Effectively save energy and greatly improve efficiency. || Using Method: Make the push boards both sides Centralized Alignment the pistons, let both sides of the push boards be forced at the same time (press both sides to assist in starting until push boards press the pistons), swing the handle until the push boards press the pistons to the suitable position, last, ajust the switch, retract the boards to remove the spreader. || The brake caliper press tool is mainly made of high carbon steel, high strength, not easy to deform, which has corrosion resistance, the blue rivet handle is made of rubber, it conforms to ergonomic design, which is non-slip, comfortable grip, uniform force, will not hurt your hands during use. It is an essential tool for automotive repair shop / 4S shop / DIY automobile repacking.